maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20%. sh6l thru sh1l sod-123fl maximum ratings (@ t a =25 o c unless otherwise noted) electrical characteristics (@t a =25 o c unless otherwise noted) dimensions in inches and (millimeters) ratings maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a = 55 o c peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (jedec method) typical thermal resistance (note 1) typical junction capacitance (note 2) symbol v rrm v dc i fsm c j t stg v rms units volts volts volts amps 1.0 20 130 15 12 amps 0 c/w 0 c/w 0 c storage temperature range r q ja typical thermal resistance (note 1) 30 r q jl i o pf operating temperature range t j sh1l 50 150 -55 to + 150 0 c sh3l SH4L 200 300 35 140 210 50 sh2l 100 70 100 200 300 sh5l 400280 400 sh6l sh1l sh3l SH4L sh2l sh5l sh6l 600600 420 2006-12 characteristics maximum average reverse current at rated dc blocking voltage v f symbol i r m a maximum instantaneous forward voltage at 1.0a dc volts 5 100 @t a = 25 o c @t a = 100 o c m a units 1.0 1.3 1.7 trr maximum reverse recovery time (note 4) nsec 50 75 notes : 1. thermal resistance :mounted on pcb. 2. measured at 1 mhz and applied reverse voltage of 4.0 volts. 3. "fully rohs compliant","100% sn plating (pb-free)". 4. test conditions: i f = 0.5a, i r = -1.0a, i rr = -0.25a. .150 (3.8).142 (3.6) .052 (1.32).050 (1.28) .033 (0.85).030 (0.75) .044 (1.12).043 (1.08) .033 (0.85).030 (0.75) .035 (0.90).028 (0.70) .039 (1.00).035 (0.90) .077 (1.95) .069 (1.75) .008 (0.20) .114 (2.9).106 (2.7) surface mount high efficiency rectifier voltage range 50 to 600 volts current 1.0 ampere features * low power loss, high efficiency * low leakage * low forward voltage * high current capability * high speed switching * high surge capability * high reliability mechanical data * epoxy: device has ul flammability classification 94v-o * mounting position: any * weight: 0.016 gram downloaded from: http:///
ambient temperature, ( o c) 25 1.0 0 0 0.80.6 0.4 0.2 75 50 175 100 125 150 rating and characteristics curves ( sh1l thru sh6l ) f i g . 2 t y p i c a l f o r w a r d c u r r e n t d e r a t i n g c u r v e f i g . 1 t e s t c i r c u i t d i a g r a m a n d r e v e r s e r e c o v e r y t i m e c h a r a c t e r i s t i c average forward current, (a) trr +0.5a 50 w noninductive 10 w noninductive 0 -0.25a -1.0a 1cm set time base for 20/1 ns/cm notes: 1 rise time = 7ns max. input impedance = 1 megohm. 22pf. 2. rise time = 10ns max. source impedance = 50 ohms. d.u.t 25 vdc(approx) ( - ) ( - ) ( + ) ( + ) 1non- inductive oscilloscope (note 1) pulse generator (note 2) single phasehalf wave 60hz resistive or inductive load instantaneous reverse current, (ua) percent of rated peak reverse voltage, (%) 0 0.1 10 1.0 1000 100 60 20 40 80 100 120 140 f i g . 3 t y p i c a l r e v e r s e c h a r a c t e r i s t i c s t a = 25 o c t a = 75 o c t a = 100 o c downloaded from: http:///
number of cycles at 60hz peak forward surge current, (a) instantaneous forward voltage, (v) 1 1 32 5 10 20 instantaneous forward current, (a) 1.0 0.3 0.1 0.03 0.01 3.0 10 20 10 5 50 100 2.5 2.0 1.5 1.0 0.5 0 3.0 3.5 rating and characteristics curves ( sh1l thru sh6l ) f i g . 4 t y p i c a l i n s t a n t a n e o u s f o r w a r d c h a r a c t e r i s t i c s f i g . 5 m a x i m u m n o n - r e p e t i t i v e f o r w a r d s u r g e c u r r e n t reverse voltage, (v) junction capacitance, (pf) 4 6 40 20 10 60 200 100 0.2 0.1 21 0.4 2 1.0 4 10 20 40 100 f i g . 6 t y p i c a l j u n c t i o n c a p a c i t a n c e 8.3ms single half sine-wave (jeded method) pulse width=300us 1% duty cycle t j = 25 o c t j = 25 o c sh1l~sh3l sh1l~sh5l SH4L~sh5l sh6l sh6l downloaded from: http:///
mounting pad layout dimensions in inches and (millimeters) 0.165 ( 4.19) ref .052 min. (1.32 min.) .033 min. (0.85 min.) .044 min. (1.12 min.) .033 min. (0.85 min.) downloaded from: http:///
rectron inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifi cations, enhancements or other changes. rectron inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. data sheet spe cifications and its information contained are intended to provide a product description only. "typical" paramet- ers which may be included on rectron data she ets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. rectron inc does not assume any liability arising out of the application or use of any product or circuit. rectron products are not designed, intend ed or authorized for use in medical, life-saving implant or other applications int ended for life-sustaining or other rela- ted applications where a failure or malfunct ion of component or circuitry may di- rectly or indirectly cause injury or threaten a li fe without expressed written appr- oval of rectron inc. customers using or selling rectron components for use in such applications do so at their own risk and shall agree to fully indemnify rect- ron inc and its subsidiaries harmless against all claims, damages and expendit- ures. disclaimer notice downloaded from: http:///
|
